SOLITUDE 1 Carbon Tent Poles: Specs and Service Life
By PEAX - Backcountry Hunting Equipment | Published: 2026-10-24
Category: Tips & Care
Get the specs, maintenance tips, and replacement guidance for PEAX SOLITUDE 1 carbon tent poles. Learn how to extend service life and when to swap them out.
Quick answer
PEAX SOLITUDE 1 carbon tent poles are adjustable from 46 to 51 inches, weigh 5.4 oz each, and use Toray 3K carbon fiber with stainless steel pins. With proper care, they last many seasons; inspect after every trip and replace if you see cracks, splinters, or bent sections.
Why carbon fiber for solo tents?
Carbon fiber poles save significant weight compared to aluminum, which matters when every ounce counts on a backcountry hunt. The trade-off is that carbon can fail more suddenly under side-load stress—it won't bend like aluminum before breaking. For a solo shelter like the SOLITUDE 1, where pole length is short and loads are moderate, carbon is an excellent choice for weight-conscious hunters.
When to replace vs. repair
Minor surface scratches on carbon fiber are cosmetic and don't affect strength. However, any visible crack, splinter, or deformation means the pole's structural integrity is compromised. Unlike aluminum, carbon cannot be safely bent back into shape. Replace damaged sections immediately. The stainless steel pins on PEAX poles are durable but can wear over time; check that they seat fully in the ferrule.
SOLITUDE 1 carbon pole FAQ
- What are the exact specs of the SOLITUDE 1 carbon poles?
- Each pole is 5.4 oz, adjustable from 46 to 51 inches in half-inch increments, made from Toray 3K carbon fiber with 304 stainless steel pins. Sold as a pair.
- How do I clean and maintain the poles?
- After each trip, wipe down the carbon sections with a damp cloth to remove dirt and grit. Dry thoroughly before storing. Check the stainless steel pins for debris or corrosion. Lubricate the twist-lock mechanism sparingly with a dry lubricant (like graphite powder) if it becomes stiff. Never use oil-based lubricants—they attract dirt. Clean and dry poles after every trip; use only dry lubricant on the locks.
- How do I store the poles to maximize service life?
- Store poles fully collapsed and loose (not tensioned) in a dry, temperature-stable environment. Avoid leaving them in a hot vehicle or direct sunlight for extended periods, as UV and heat can degrade the epoxy in carbon fiber over time. Use the included storage sack to prevent scratches. Store collapsed and loose in a cool, dry place away from UV.
- When should I replace the poles?
- Replace immediately if you see any crack, splinter, or delamination in the carbon fiber. Also replace if a section is bent or the locking mechanism no longer holds securely. Minor surface scratches are normal and not a concern. If a stainless steel pin is bent or broken, replace the entire section. Replace at first sign of crack, splinter, or bent section—carbon cannot be repaired safely.
- Can I use the poles with other tents?
- The SOLITUDE 1 poles are designed specifically for the PEAX SOLITUDE 1 tent. The 46-51 inch adjustable range and pin configuration may not match other shelters. Using them with a non-compatible tent risks pole damage or tent failure. Stick with the intended shelter for reliable performance.
Product facts
- SOLITUDE 1 CARBON TENT POLES: Built from Toray 3K carbon fiber with 304 stainless steel pins; three-section design adjusts from 46" to 51" in 1/2" increments; weight 5.4 oz each; sold in pairs. The fine adjustment range lets you pitch the SOLITUDE 1 perfectly on uneven terrain without carrying extra weight, and the stainless pins resist corrosion during wet trips.
SOLITUDE 1 CARBON TENT POLES
